Matters Needing Attention For The Acceptance Of The Segment Code Screen

Risenta specializes in the production of various LCD screens, please click to contact us


Some friends will ask, what should I pay attention to after I order a segment code screen for the first time? If there is a problem, how to solve it?

The first point is that after we get the sample, the first thing we need to confirm is the size of the segment code screen, whether it is the same as when we customized it, and compare it with the model of the drawing to see if it is where

There are choices.

Finally, try to install it into the product you need, and insert the segment code screen with metal pins into the circuit board to see if it can be used smoothly and light up.

The second point is that after we have received the sample, after lighting the segment code screen, we must check the displayed content to see if there are any missing segments in the graphics. Practice the graphics. Some are clear and some are blurred, etc. If there is, then

This phenomenon is not passed, and it is also an unqualified sample.

The third point we want to check after lighting the segment code screen is its viewing angle. Observe whether the visible area is clear according to the drawing. If a ghost appears in the visible viewing angle, it means that the visible area is wrong.

The manufacturer solves the problem.

The fourth point is that we are lighting up the segment code screen to check if there is no problem, then we need to check its voltage. Some friends may think there is nothing. After all, the voltage is definitely ok.

This is true, but when it is actually used, there will still be some problems in the later stage. For example, the words we often say are too light, which means that the voltage is too high, so this batch of segment code screen samples is not

passed.