2 Inch SPI Interface TFT LCD Display Module With Touch

Description

Item	Specification
Display Mode	Normally Black,Transmissive
Display Technology	α-Si TFT active matrix
Outline Dimension	35.50(H) X 51.40(V) X 3.55(T)
Active Area	30.6 (H) X 40.8 (V) mm
Resolution	240X(RGB)X320 dots
Pixel Pitch	0.1275X0.1275 mm
Pixel Configuration	RGB Stripe
Backlight	White LED
Luminance	(250)(Min.) cd/m2
Surface Treatment	Anti-Glare
Driver IC	ST7789V
Viewing Direction	All

Pin No.	Symbol	I/O or connect to	Description	When not in use
1	LEDA	LED DRIVER	Backlight anode.	-
2	LEDK	LED DRIVER	This pin is used to be serial interface clock.	-
3	GND	PWR SUPPLY	POWER GROUND.	-
4	RESET	I/O	Reset pin.	-
5	TE	I/O	Tearing effect signal.	-
6	RS/DCX	I/O	Display data/command selection pin in 4-line serial interface.	GND/IOVCC
7	SCLK	I/O	The serial interface clock signal.	GND/IOVCC
8	SDA	I/O	SPI interface input/output pin.	GND/IOVCC
9	CS	I/O	Chip select signal.	GND/IOVCC
10	GND	PWR SUPPLY	POWER GROUND.	-
11	IOVCC	PWR SUPPLY	Interface power supply,1.65v~3.3V.	-
12	VCC	PWR SUPPLY	Analog power supply, 2.5V~3.3V.	-
13	GND	PWR SUPPLY	POWER GROUND.	-
14	NC	-	No connect.	-
15	GND	PWR SUPPLY	Backlight cathode.